Posted by admin | Posted in tractors | Posted on 17-09-2011
Tags: auto, car, inner tie rod, inner tie rod end, inner tie rod removal tool, inner tie rod replacement cost, inner tie rod tool, magnum, rod, tie
Why it is Important to Replace Ball Joint Boots
Possibly even more than the engine, it is the front suspension of the car that takes the most punishment; hence the most wear and tear. While it is true that an engine is asked to rotate at very high rpms, metallurgy and technology have come together to makes these engines last for hundreds of thousands of kilometres with proper maintenance.
On the other hand, front suspension components have to resist deflections in the upward/downward and sideward planes while keeping the tire contact on the road as the suspension engineers designed. One of the most stressed suspension components in the suspension are the ball joints. The ball joints are high-strength steel units that act as the pivot point between the suspension and the vehicle’s tires. Aside from supporting the vehicle’s weight, ball joints help keep the tire located when the vehicle is steered and as the suspension moves up and down its arc of travel. Aside from that, it has to be sturdy enough to withstand the bumps, ruts and considerable impacts that a vehicle encounters as it travels down the road.
Just a decade ago, there were no replacement ball joint boots available on the market. Even if ball joints then had grease fittings to allow fresh grease to pump into the ball joints, there was no option to replace ball joint boots and you would have to replace the ball joints when the boots got torn. Even with fresh grease, torn boots would allow grit and other components to get into the ball joint assembly and the abrasive paste that resulted would destroy the ball joints shortly afterward. Thankfully, you can now replace ball joint boots on most vehicles, allowing a car owner the normal service life that the ball joint was designed for.
Ball joint boots are usually non serviceable parts, with the sometimes very expensive joints being protected by just a thin rubber boot the thickness of an inner tube. Obviously, this can be easily cracked or torn through accident or carelessness when other components of the brakes or suspension are serviced. When this happens, your ball joints are on the fast track to replacement unless you replace your ball joint boots. Replacement boots are plentiful nowadays, and alternative materials like urethane are being used to ensure added protection and longer service life. They resist damage from rocks, road salt, sand and water better than most rubber boots. If possible, look for replacement boots that have a thin spring around the base of the boot. This helps seal the boot around the ball joint.
Nowadays, an owner can replace ball joint boots but the sealed construction of tie rod ends and ball joints mean that when the grease packing these joints dry out, faster wear results and you have to replace the joints sooner rather than later. It would be great if you could find replacement ball joints with grease fittings. This would allow you to regularly freshen the grease in the joints, prolonging the service life of the part. If you decide to replace ball joint boots yourself, it’s best to use a tool called a tie rod lifter to separate the joint from the linkage. Thoroughly remove any grit that may have entered the ball joint through the torn boot before you put in the new one. Normally, there is no need to realign the car when you replace ball joint boots.
About the Author
Find out more on suspension or visit this site to sell spare car parts.
Inner Tie Rod End Removal Walkthrough updated
|
|
GTO 3.0 90-00 FRONT INNER OUTER TIE TRACK ROD END X4 $1,035.37 |
|
|
3000GT 3.0 92-99 FRONT OUTER INNER TIE TRACK ROD END X4 $1,019.57 |
|
|
Audi s4 Steering Rack + inner tie rods REBUILT -$75 cor $850.00 |
|
|
VW Steering Rack Assembly, w/Inner Tie Rods (ZF) 3B1422052SX $753.78 |
|
|
2 Lower Control Arm Ball Joint Sway Bar Link Inner Outer Tie Rod MURANO 05-07 $653.99 |
|
|
2 Lower Control Arm Ball Joint Sway Bar Link Kit Inner Outer Tie Rod MURANO $649.99 |
|
|
Mercedes W220 S500 S430 Control Thrust Arm Ball Joint Joints Inner Outer Tie Rod $499.99 |
|
|
Mercedes W211 E320 E350 E500 Control Arms Ball Joint Joints inner Outer Tie Rods $499.99 |
|
|
Lower Control Arm Ball Joint Inner Outer Tie Rod End Sway Bar Link Mustang 05-10 $499.99 |
|
|
Upper Control Arm Lower Ball Joint Outer Inner Tie Rod Idler Arm KIA Sportage $497.81 |
|
|
Jaguar XJS Steering Rack w/Inner and Outer Tie Rods OEM Jag JLM20175E $495.00 |
|
|
Upper Lower Control Arm Ball Joint KIT SET Inner Outer Tie Rod End Sway Bar Link $487.21 |
|
|
Upper Lower Control Arm Ball Joint KIT SET Inner Outer Tie Rod End Sway Bar Link $487.20 |
|
|
Upper Lower Ball Joint Outer Inner Tie Rod Idler Arm Sway Bar Link Sportage KIA $459.71 |
|
|
Volvo 940 Steering Rack + boots + inner tie rods REBUILT -$150 core refund. $451.90 |
|
|
Ferrari 360, Inner Tie Rod Repair Kit, Unavailable From The Dealer $450.00 |
|
|
Lower Control Arm Ball Joint Outer Inner Tie Rod Sway Bar Link Malibu G6 Aura $439.99 |
|
|
UPPER BALL JOINT,LOWER BALL JOINT, PITMAN ARM, IDLER ARM,INNER OUTER TIE ROD END $425.10 |
|
|
Lower Ball Joint Inner Outer Tie Rod End Front Rear Sway Bar Links Lincoln LS $419.99 |
|
|
Complete Remanufactured Steering Rack & Pinion with Inner Tie Rods # 263 $399.95 |
|
|
Rubbermaid 3G59 Configurations 4-to-8 Foot Classic Custom Closet Kit, White $82.99 Rubbermaid 3G5900WHT Configurations; Closet Kit WhiteRubbermaid 3G5900WHT Configurations; Closet Kit White Features:; Organize and customize your closet; Adjustable shelves and hanging rods; Durable and stylish; Accessory organizers install easily on any Configurations; system; No cutting needed; Fit any closet from 4′ to 8′; White finish… |
|
|
Tool Aid 61900 Tie Rod End/Ball Joint Lifter $12.95 This labor saving tool quickly separates tie rod ends and ball joints from suspension components. Eliminates broken grease reservoirs. No need for excessive hammering. Powerful lever action breaks loose even the most stubborn joints. Works on virtually all tie rod ends and compact car ball joints. Heavy duty, all metal construction. For use with hand tools only. Instructions included…. |
|
|
Alltrade 648607 Kit 26 Inner Tie Rod Remover Tool Set $50.85 648607 Features: -Tie rod remover kit.-For use on ford taurus, tempo and escort.-For use on mercury topaz and lynx. Includes: -Storage case includes usage photos and instructions.-Kit 40 includes 9-piece for removing the hub and axle. Dimensions: -Dimensions: 9.88” H x 19.25” W x 3.5” D. Warranty: -Lifetime limited warranty…. |
|
|
Moog ES3571 Steering Center Link Tie Rod End $32.10 Moog Automotive Es3571 Tie Rod End… |
|
|
GENIUS AT-4808 INNER TIE ROD TOOL SET $51.75 14mm Open Jaw Driver 000800 17mm Open Jaw Driver 000800 33.6mm Open Jaw Driver 000800 1-3/16″ Open Jaw Driver 000800 1-1/4″ Open Jaw Driver 000800 1-5/16″ Open Jaw Driver 000800 1-7/16″ Open Jaw Driver 000800 Long Socket 005500 Plastic Case These tools are specially designed for the inner tie rods that are inaccessible to adjust. The long socket can be easily used with seven open-jaw d… |
|
|
Moog ES3488 Steering Center Link Tie Rod End $34.80 Moog Automotive Es3488 Tie Rod End… |
|
|
Unraveling The Inner Game To Tie Rod Ends Sales Success Online … |
|
|
The Ultimate Super Marketing, Success Principles and Inner Game for Tie Rod Ends Businesses 3 CD Combo Pack … |